High-damage-threshold all-silica fibers engineered for the 2100 nm holmium wavelength — proven in lithotripsy, HoLEP, arthroscopy and spine procedures, with full OEM customization.
Comparing fiber types? See bare fiber, radial fiber or side firing fiber — or tell us about your OEM project.
All holmium fibers share the same low-OH all-silica construction tuned for the 2100 nm Ho:YAG wavelength and are available in both single-use and reusable versions.
| Fiber Core | Item No. |
|---|---|
| 272 µm | HS-272/420-3.0 |
| 365 µm | HS-365/550-3.0 |
| 550 µm | HS-550/750-3.0 |
Cost per case
Single-use vs reusable laser fiber reduces to one number: the reuse count you divide by. Where that number comes from, and what it costs when it is wrong.
Read article
Fiber selection
Choosing a holmium laser fiber diameter for stones? Compare 200, 272, 365 and 550 µm on energy density, deflection, irrigation and burn-back.
Read article
Clinical technique
Dusting or fragmentation? How to match holmium settings and fiber to the stone - consensus ranges, cost data and each technique's failure mode.
Read article
Quality & compliance
A laser fiber IFU is a list of the risks the design did not remove. The four things worth checking, and why the warnings are the part to read first.
Read article
Whether you need a prototype run or an ongoing OEM programme, our fiber engineers are here to advise — from drawing review through to series production. Tell us about your project; we look forward to working with you.
No. 302, Room 17, East Lake High-tech Industrial Innovation Base, No. 9, Mianshan Avenue, Mianshan Industrial Zone, Jiangxia District, Wuhan City
Urology